BT UC-351GP/E-UK Instrukcja Instalacji Pobierz pdf (Strona 13)

BT Redcare Secure Issue 16 June 2010

The outputs are wired to J1400 as shown.

Figure 9 - J1400 General Purpose Output Pins

By default, the General Purpose outputs (GPOP‟s) have the following specific purposes:

GPOP1: Local path fault output (BSIA Form 175 mode)

GPOP2: ARC controlled output

GPOP3: Return path signalling (RPS) output (in conjunction with input pin 4)

WARNING

Connectors J600, J800, J1000, J1300, J1301 and J1400 have been classified as SELV and

shall only be connected to approved SELV circuits. If the circuit to be connected to these

terminals is not SELV, a regulatory authority compliant isolation unit must be used. SELV

circuits are determined in IEC60950.

For basic installations the wiring of GPOP‟s is not required.

Where local comms fail reporting is required in compliance with BSIA form 175 then

make the following connections.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Brak uwag

BT UC-351GP/E-UK Instrukcja Instalacji Strona 13